Electromagnetic plugging tool is a large pipe body, vehicle tanker and other in high-temperature and high-pressure non-stop car plugging of the necessary special tools, the product is my factory for many years of research and design of a new type of electromagnetic plugging tool, its novel design, reasonable structure, light carrying, simple operation.

Ii. components and main technical parameters

1, electromagnetic plugging tool mainly by the permanent magnet and PSI with pressure plugging glue rod composition.

2, the main technical parameters :

① Permanent Magnet Technical parameters:

The use of high-performance magnetic materials, so that the size of smaller, lighter weight, suction strength. Unique magnetic circuit design, residual magnetism is almost zero. High safety factor, maximum pulling force, is the rated lifting of 3.5times. Handle Switch with safety button, can be operated by one hand, convenient and safe. No electricity, no power, safe to use.

② PSI with pressure plugging glue rod Technical parameters:

Physical state: Paste
operating time:5min
Full Curing time:30h
Color: various colors
density (g/cm3):1.82
Compression Strength (MPa) GB/T1041-1992:96.6
tensile strength (MPa) GB/T6329-1996:
Shear Strength (MPa) GB/T7124-1999:12.5
hardness after curing (Shore D) GB/T2411-1980: the
Operating Temperature (℃) : -60 ~ 149
Packing Specification:114g/ Root
Third, the use of instructions
( 1) Open the Toolbox and take out the electromagnetic plugging device. 
( 2) According to the leaking substance, cut a small piece . plugging glue rod , rub it evenly with your hands and press it hard at the leak site . make it Curing .

( 3) hold the handle with both hands, align the electromagnetic plugging device at the leak point, then move the magnetic switch up and down at the same time, turn on the magnetic switch, use the positive and negative pole conversion, produce the magnetic field adsorption to the tank wall. 
( 4) wait 1-2 minutes, make sure the adsorption is firm, the hands can be let go. 
Iv. precautions

(1) When using equipment, take it lightly to prevent damage to the equipment. 
( 2) when in use, you must ≤ $ Use of the environment, otherwise the magnetic field does not produce adsorption magnetism. 
( 3) Adjust the arc of the electromagnetic plugging block must be consistent with the arc of the tank wall, the plugging effect is more effective. 
( 4) operators wear personal protective equipment as needed.

(5) The shelf life of this plugging tool is two years.