Multifunctional mobile Fire cannon is a new type of fire cannon developed by our factory, the fire gun rated high flow, small rear seat force, light weight, easy to operate, and equipped with safety devices, is the preferred equipment for fire fighting training. 

Performance parameters

rated Flow:50L/s

rated working pressure:1.0MPa

Operating pressure range: (0.4-1.2) MPa

Maximum range:≥60m

Maximum Spray angle:≥110°

Pitch angle:+30°--+75°

Horizontal Rotation angle:≥270°

Weight:22kg

Connection method: Kyk male Theiang buckle or 65# quick buckle

How to do this

1, open the base of stainless steel support feet, flat on the ground.

2, the gun Head quick Connector and the base of the quick connector docking, rotation angle adjustment, press the rotation lock wrench.

3. Connect the safety chain to the fixture of the precursor of the cannon, and if there is no fixture, you can fix a wooden stick in the predecessor of the cannon (this operation is generally not required on the ground with a slope of less than 10 °).

4, according to 65# rapid buckle connection water belt.

5, open the water valve, pressurized to the gun body water supply (according to the fire source near the regulation of hydraulic 0.4 MPa-1.2 MPa to control the range size).

6, according to the actual combat needs, shake the shaking rod, adjust the head of the bow, elevation.

7, adjust the flowering device, control the effluent into flowering or DC state.

8, after the use of the end, wait for the water cannon in the residual water drain, press the button on the safety sliding valve, the cannon body removed from the base, take off the boiling water belt buckle, close the stainless steel support foot.

9, in the normal use of the case, the shelf life of two years.